1. Introduction
Safety Labels and Safety Label Identification
User Manual
Safety Labels and Safety Label Identification
Labels
Safety labels and identification labels are placed on the Cryocooler P-102. These labels provide
information for operators and service personnel to identify hazards. Some labels inform the user about
the product. This section describes each label and identifies its location. Safety labels give
instructions on how to avoid the hazard.
Label Identification and Location
Table 1-5 lists the labels that are affixed to the P-102. These labels alert personnel to hazards on or
within the product. They also provide information about the product.
Hazard: Mechanical Motion
Qty: 2
Location: One on the fan shroud, half way up the side. One on the base plate on
the side of the fan that is not shrouded.
Hazard Type: CAUTION
Possible Injuries: Damage to fingers
How to avoid the hazard: Keep hands away from the fan.
Hazard: Electrical Hazardous Voltage
Qty: 1
Location: Panel in front of where the terminal block mounts inisde the P-102
Hazard Type: WARNING
Possible Injuries: Electrical Shock or Burn
How to avoid the hazard: Lockout/Tagout before servicing
Hazard Type: Electrical High Voltage
Qty: 2
Location: One on the compressor electrical box cover. One on the upper corner
of the right side cover within which the terminal strip is mounted.
Hazard Type: WARNING
Possible Injuries: Electrical Shock or Burn
How to avoid the hazard: Lockout/Tagout before Servicing. Servicing by qualified
personnel
Serial Label
Qty: 1
Location: Lower right corner of upper real panel.
Hazard Type: N/A
Possible Injuries: N/A
How to avoid the hazard: N/A
Figure 1-2
shows the location of each label. To replace a lost or damaged label call Brooks Automation
Technical Support.
1-9
Brooks Automation
