Brooks Automation
Part Number: 281947 Rev. C
5. Reading a Tube
The FluidX Scope USB makes reading tubes easy. By
default, the device is not in continuous scanning mode,
so the button will need to be pressed to scan.
Step
Action
1.
Hold the tube approximately 0.5 cm (0.2 in) from
the scanning window, and then press the button
on top of the reader.
NOTE:
This will prevent cross contamination
and damage to the scanning window.
2.
The unit will beep once to indicate a successful
read.
Copyright © 2018, Brooks Automation, Inc.
7
Copyright © 2020, Brooks Automation, Inc.
7
