PFC Operation Manual
2. Safety
825160-00 revision B
43
Lockout/Tagout (LOTO)
Standard industry practices regarding lockout/tagout (LOTO) procedures must be followed when
service or mainte
onal injury or
equipment damage. Local or factory standard pr
ollowed; but where no
pro
ollow the procedures for LOTO i
n power switc
ed to be used as a LOTO power switch
(see Figure 13). When this switch is in the OFF position, the top of the switch can be swiveled
vealing the ho
Fig
Continued next page
nance is performed on the PFC in order to prevent pers
ocedures must also be f
cedures exist, f
n SEMI S2.
The mai
h on the front of the PFC is design
open, re
les where you can put a lock and a tag.
ure 13. PFC Main Power Switch LOTO Design
Holes for a tag
and a lock
