Brooklyn BP1BK, Инструкция по эксплуатации

Страница: 6 / 8

6
OPERATIONS
BLUETOOTH
1. Turn on the speaker by long pressing the power button for three seconds,
the LED indicator light will flash blue.
2. Turn on the Bluetooth function of your Smartphone.
3. Search for the Bluetooth devices and select
“BP1”
from the list.
4. Click it and pair the speaker with your Smartphone.
5. Enter the code
“0000”
if needed.
6. After successfully paired, the speaker can play music of your Smartphone.
7. For next time, you just need to press the
“ON/OFF”
button until you hear beeps
and release it, then the speaker will connect to your mobile device automatically.
AUX
Plug one end of a 3.5mm audio cable into the unit and plug the other end of the
cable into the audio source, when heard a reminder tone, then can play music.
Your BT speaker will automatically switch to AUX mode.
TF CARD
Insert TF Card into TF slot to play music, support mp3/wma audio fomat, and support the
maximum capacity of 32 GB. (TF card not included)
MICRO USB (FOR CHARGING DEVICE)
1. Use the cable provided to connect one side to a USB port and the other side (Micro
USB) to your device.
2. On the bottom of the product a red light will indicate the product is charging.
3. Depending on the charger voltage and current the charging time can be
between 3-4 hours.
4. The speaker can be used while charging.
5. Once charging is completed the red light will go out.
HANDS-FREE
**When connected via Bluetooth to your smartphone device, and in bluetooth mode.
1.
While connected, when you receive phone calls you can press the Circle
“PLAY/PAUSE” button to answer any incoming phone calls.
2. Press the “PLAY/PAUSE” button again if you wish to hang up.