2
Sizing Chart
Choose the correct size as outlined below:
Bronko Belt RTI Size
Waist Size
Height
Large / Adult
32”– 38” (81 cm – 96 cm)
5' 6”– 6' 6” (167 cm – 198 cm)
Small / Youth
28”– 32” (71 cm – 81 cm)
4’6”– 5’ 6” (137 cm – 167 cm)
Wearing the Belt
Package Contents
Each Bronko Belt RTI includes the following:
1 Waist Belt
2 Weight Packs
Training Weight (Large size comes with 8 lbs. Training
Weight. Small size comes with 4 lbs. Training Weight.)
(See IMAGE 1. Training Weight for Large size shown)
Getting Started
Put on your skates and protective equipment (except
helmet and gloves). Fasten your pants securely.
Temporarily tuck your jersey into your pants to make
putting on the Bronko Belt RTI easier. (See IMAGE 2)
Putting The Bronko Belt On
STEP 1: Securely fasten the Bronko Waist Belt around
your waist:
On the exterior of your hockey pants and on top of the
belt built into your hockey pants (See IMAGE 3)
With the central buckle centered in the front and both
front anchor buckles approximately 1” from the central
buckle
With the Rip Cord loop centered in the back and facing
downwards. (See IMAGE 4)
Tips:
If your hockey pants have a slash guard (an extra
layer of padding covering the belt in your hockey
pants) try to position the Bronko Waist Belt
slightly below the slash guard. (See IMAGE 4)
This will help ensure a snug fit and help prevent
the Bronko Belt RTI from moving during use.
When necessary, adjust the position of each
anchor buckle on the front of the belt by lifting
the locking clip resting on each buckle and sliding
the buckle into the desired position. (See IMAGE
5) Each anchor buckle will lock in place
automatically when the belt is pulled tight. Once
the anchor buckles are properly positioned, you
