BRONKHORST mini CORI-FLOW M1 Series Скачать руководство пользователя

Страница: 15 / 51

Bronkhorst®

Instruction Manual mini CORI-FLOW™ M1x

9.17.050O

Alternatively, connect the instrument to a Bronkhorst® readout and

control unit (BRIGHT/E-8000). In this case, the instrument can also be

powered through the readout and control unit. With the display interface

and control buttons most digital parameters and functions can be used.

For RS-232 communication with a third party micro controller device (e.g. a PLC, refer to the hook-up diagram for RS-232

operation to connect the required signals).

2.6.3

Digital RS-485 connection (fieldbus)

If the instrument is provided with a dedicated fieldbus interface, it can be

operated digitally in a fieldbus system, using RS-485 communication. In

FLOW-BUS, Modbus and DeviceNet™ systems, the fieldbus connector (5-

pin M12) can also be used to power the instrument. In PROFIBUS DP

systems, the instrument is always powered through the 8-pin DIN power

connector.

Never

power the instrument simultaneously from

two different power sources

(e.g. fieldbus and Plug-in Power Supply).

Doing so will irreversibly damage the printed circuit board and the instrument will have to be repaired before it can be

used.

Always check the total power consumption of your instruments before connecting them to a fieldbus system. Do not exceed

the maximum power of the power supply unit.

If you need assistance with setting up a fieldbus configuration, contact your Bronkhorst representative for information.

2.6.3.1

FLOW-BUS

FLOW-BUS is a Bronkhorst® designed fieldbus, based on RS-485 technology, for digital communication between devices,

offering the possibility of host-control by a Windows computer.

Characteristics:

Baud rate 187500 (default) or 400000 Baud

+15…24 Vdc supply voltage

Easy installation and communication with other Bronkhorst® devices

Automatic node search and bus optimization (gap fixing)

RS-232 communication (

ProPar

) with Windows computer (local host)

Connection of up to 120 instruments on a single bus

Maximum bus length: 600 m

Consult

Instruction manual FLOW-BUS interface

(document no. 9.17.024) for more information about setting up a

FLOW-BUS network.

Power the instruments in a FLOW-BUS local-host system by hooking-up the power supply directly on the FLOW-BUS line

and not by powering a set of instruments through the 8-pin DIN connector on one of the digital instruments.

Содержание mini CORI-FLOW M1 Series




















































Результаты поиска

Содержание mini CORI-FLOW M1 Series

Отзывы:

Похожие инструкции для mini CORI-FLOW M1 Series

Бренды по названию

Популярные бренды

BRONKHORST mini CORI-FLOW M1 Series, Инструкция по эксплуатации

Результаты поиска

Содержание mini CORI-FLOW M1 Series

Отзывы:

Похожие инструкции для mini CORI-FLOW M1 Series

Бренды по названию

Популярные бренды