MASS-STREAM
TM
Instruction Manual D-6200
9.17.112A – Date of issue: 2017-03
Page 9 off 12
1.4 Specifications of analog MASS-STREAM
TM
Instruments D-6200
Measurement System
Accuracy
(based on calibration with Air)
± 3% FS including non-linearity
(± 2% FS on request)
Repeatability
< ± 0.5% FS
Pressure sensitivity
± 0.3% RD / bar typical (Air)
Temperature sensitivity
± 0.3% RD / °C (Air)
Response time sensor (
τ
63%)
appr. 1.2 sec
Leak integrity (outboard)
< 2·10
-7
mbar l/sec He
Mechanical Parts
Sensor
Stainless steel SS316 (AISI 316L, 1.4404)
Instrument body
Aluminium EN AW-6082-T6 (AL 50ST/51ST)
anodised
OR
Stainless steel SS316 (AISI 316L, 1.4404)
Sieves
Stainless steel
Distance parts
Teflon
Protection
IP40
Operating Limits
Measuring range
5…100% (1:20)
Temperature
0…50 °C
Pressure
0…10 bar(g) for aluminium body
0…20 bar(g) for stainless steel body
The maximum operating pressure of controllers
also depends on the selected valve!
Warm-up time
30 min for optimum accuracy
within 30 sec for accuracy ± 4% FS
Electrical Properties
Supply voltage
+15 Vdc OR 24 Vdc ± 10%
with BJ-valve: +24 Vdc
Current peak values
Inrush current: max. 250 mA
Meter:
approx. 75 mA at 0% flow
approx. 175 mA at 100% flow
Controller:
add 250 mA
Output signal
0…5 Vdc active OR 4…20 mA active
Instrument connector
6-pin round DIN (male)
optional for controllers: 15-pin sub-D (male)
