-
- 6 -
• Press and hold the
button to toggle between dialling modes:
‘P’ will appear when set to pulse or ‘T’ when set to tone (DTMF) dialling
• After 5 sec. the unit returns to standby
Note: You can change by accident the dial mode of the phone when pressing the
recall/Flash key ‘R’ for 5 sec in standby. The wrong dialling mode will
cause that the number isn’t dialled correctly or isn’t dialled at all.
5. Caller-ID function (CLIP)
DC2080V displays the telephone numbers of incoming calls. This function is only
possible if you are subscribed to a telephone operator that provides this service. Contact your
telephone provider for more information. When you receive a call, the numbers are saved in
a Call list. This list can hold 20 telephone numbers (each of max. 23 digits). If the number is
longer then 12 digits, you can press the
key to show the other digits!
5.1 New calls
When you’ve received a new unanswered call, the CLIP symbol
will blink on the display.
5.2 Consulting the Call list
• Press the
button . The last received call is shown on the display. If the list is
empty, ‘NO CLIP’ is shown on the display.
o The following will be shown on the display:
Progress number
Date (DD-MM) *
Time (24h format) *
15 4-10 16:57
• After 5 seconds, the telephone number will be shown. You can skip the date/time by
pressing the
button.
• Use the left scroll key
to scroll to the previous call. Use the
button to show the next
call.
• You can leave the Call list by pressing the
button.
* Only when the network sends the time/date together with the telephone
number!!! On
some networks with caller ID, time and date will not be displayed
