-
- 4 -
4.1.4 Redial one of the last 3 numbers dialled
• Press the
key . The number you last called appears on the display. If you would
like to dial one of the last 3 numbers dialled, press the
key a few times until the
desired number appears on the display.
• Press the
key .
• The number shown on the display is dialled automatically.
• After finishing your call, press the
key to hang up.
ENGLISH
4.2 Incoming calls
• When a call comes in, the handset will start to ring.
• Press the
button to answer the incoming call.
4.3 Activate/deactivate hands free function
This function allows you to communicate without having to pick up the handset. When
you are on the phone, press the
key to activate the hands free function.
Press the same button to deactivate the hands free function.
4.4 Programming memory numbers
You can program 10 indirect numbers (of max. 24 digits) in the phone’s memory.
• Press and hold the
button until the
icon appears on the display.
• Enter the telephone number you whish to store.
• Press the
button again to confirm.
• Enter the memory location (0-9) where you want to store the number.
• You will hear a confirmation tone and the -icon will disappear.
4.5 Calling a memory number
• Press the
button , followed by the number of the memory location (0-9).
• Press the
button . The memory number will be dialled automatically.
• Press the
button when you want to terminate the call.
4.6 Mute function
It is possible to deactivate the microphone during a conversation. Now you can speak openly
without being heard by your correspondent.
• Press the
button during a conversation. The microphone will be deactivated.
The MUTE symbol
appears on the display.
• Press the
button again when you want to continue the conversation.
4.7 Setting the volume
During a conversation you can set the volume by pressing the
button. You can
set the volume from 1 to 5.
When you are calling in hands free mode and you want to change the
volume, press the
button.
When you use the hands free function for a long time, the batteries will be
empty more quickly !
If you wish to insert a pause, press the Redial/Pause button on the
location where you want a pause of 3 sec.
