BRONDI DC6010TR, Инструкция по эксплуатации

Страница: 15 / 80

15
SAVE IN THE NUMBER BOOK, CANCELLING A NUMBER OF THE LIST
1. With handset in stanbdby, press the button
MENU
.
2. Press once the button
CH-
and then .
3. Use the buttons
CH+
and
CH-
to scroll the list.
4. Press the button
and select between:
a. “Save”:
1) press the button , the display shows “
Enter name
”: dial the name you want
to associate to the telephone number;
2) press
to con
fi rm. You will hear a con fi rmation beep, and the display returns
to stand-by.
b. “Delete”:
1) press the button , the display shows “
Delete
”.
2) press again the button to con fi rm. You will hear a con fi rmation beep, and
the display shows a number of the list. Press the button to return to stand-by.
c. “Deletel all”:
1) press the button , the display shows “
Delete all ?
”;
2) press again the button to con fi rm. You will hear a con fi rmation beep and the
display returns to stand-by.
NOTE: If there is no number in the list, the display shows “
No Number
”.
7.3 CORDLESS: ADJUSTMENTS
7.3.1 CUSTOMISATION OF CORDLESS NAME
1. Press
MENU
and then use the buttons
CH+
and
CH-
to scroll the list, up to select “
3. HS
Setting
”.
2. Press twice the button , the display shows “
HS Name
”; dial the name and then press
to con
fi rm, the handset returns to stand-by.
7.3.2 OPERATOR’S CODE
This function allows you to program up to 3 codes of telephone companies, so that you can
pre-set them to the telephone number quickly, any time you want.
PROGRAMMING THE CODES AND THE COMPANY NAMES
1. Press
MENU
and then use the buttons
CH+
and
CH-
to scroll the list, up to select “
3. HS
Setting
”.
2. Press the button , and scroll the menu up to select “
Callbycall
”, press to con fi rm
the choice.
3. Select “
1. Number 1
” and press if you want to adjust the fi rst code, or select one of
the 2 other positions using the button
CH-
, before pressing .
4. The display shows “
Enter number
”.
5. Dial the code of the telephone company (max 12 fi gures) and press to con fi rm, the
display shows “
Enter number
”.
6. Insert the name of the telephone company and press ; the code shall be stored.
7. The display returns to the cordless menu, press the button to return to stand-by.
USE OF THE FUNCTION
If you want to make a call using one of the company codes previously programmed:
1. In stand-by press the button , and scroll the list to choose the name of the telephone
company and, when it is selected, press again ;
2. Dial the telephone number, and press the button , the call will be made using the
company selected by you.
7.3.3 ACCESS CODE TO CALL THE NUMBER OF THE “CALLS RECEIVED” LIST (operation under
switchboard)
If your cordless is connected to a PABX switchboard and if this latter is fi tted for the caller’s
identi fi cation service, in order to recall the number from the list of calls received, you must
adjust the access code of the switchboard.
NB: The cordless stores the numbers of calls received only if the caller’s identi fi cation service is
activated at your telephone company.
1. Press MENU and then use the buttons CH+ and CH- to scroll the list, up to select “
3. HS
Setting
”.
2. Press the button , and scroll the menu up to select “
Access code
”, press to
con fi rm the choice.
3. Insert the code and press to con fi rm. Press the button to return to stand-by.
DC6010TR-lingue 28-10-2005, 14:14 15