brondell Swash T22-EW, Руководство пользователя

Страница: 23 / 100

23
PRODUCT OPERATION
Expert Mode Operations Level 2
2. Changing
Cycle Times
Rear Wash
(default 2 min)
Front Wash
(default 2 min)
Strong Wash
(default 2 min)
1. Press/hold Rear
& Water Temp
together.
1. Press/hold Front
& Water Temp
together.
1. Press/hold Strong
& Water Temp
together.
2. Water Temp light
blinks.
2. Water Temp light
blinks.
2. Water Temp light
blinks.
3. Continue to press
Rear without
releasing.
3. Continue to press
Front without
releasing.
3. Continue to press
Strong without
releasing.
4. Press Water Temp
to select new cycle
time with LED light.
OFF=1 min
Green=2 min
Orange=3 min
Red=5 min
4. Press Water Temp
to select new cycle
time with LED light.
OFF=1 min
Green=2 min
Orange=3 min
Red=5 min
4. Press Water Temp
to select new cycle
time with LED light.
OFF=1 min
Green=2 min
Orange=3 min
Red=5 min
5. Release to set
new time.
5. Release to set
new time.
5. Release to set
new time.
1. Enter Expert Mode
Level 2
1. Press/hold STOP
& Nozzle Cleaning
for 2 seconds.
2. Nozzle Cleaning
LED starts blinking
to indicate Special
Mode has been
entered.
3. Turn OFF seat
sensor - place hand
on right area of
seat.
4. 5 LED indicator
lights turns OFF =
Seat Sensor OFF.
Expert Mode Operations Level 2 allows for
customizing and changing the cycle times for
Rear Wash, Front Wash, Strong Wash, Warm Air
Dryer, Gentle Wash, and Gentle Wash Dry Cycle.
Custom programming must be performed in
Expert Mode status with the seat sensor overridden
and turned off, and with the seat unoccupied.
Using the remote, follow steps 1-3 to enter,
program, and exit Expert Mode Level 2.