brondell Revive PR50-B, Руководство пользователя

Страница: 26 / 104

24
REPLACING THE AIR FILTERS
Step 6
1. Remove the Front Cover by pulling the top of the cover
towards you and then lifting up to disengage the bottom
hinges.
2. Remove the Mesh Pre-Filter by pressing down on the two
tabs at the top of the filter and pulling the filter out of the
machine. Remove the used Active Carbon and True HEPA
filters.
3. Remove the plastic wrapping from the new Active Carbon
and True HEPA filters.
4. Put the filters back into the machine in the following order,
ensuring that the pull-tabs on the True HEPA and Active
Carbon Filters face torwards you:
a. True HEPA Filter (this goes in first)
b. Active Carbon Filter
c. Mesh Pre-Filter
5. Put the Front Cover back on the Revive. Be sure it is
seated correctly, as the unit will not power on if the Front
Cover is not secure.
6. Remove the Back Cover by pulling down on the
indentation at the top and lifting it away from the body of
the machine.
7. Remove the used Specialized and True HEPA Filters from
the back of the Revive and remove the plastic wrapping
from the new filters.
8. Put the filters back into the machine in the following
order, ensuring that the pull-tabs on the True HEPA and
Specialized Filters face towards you:
a. True HEPA Filter (this goes in first)
b. Specialized Filter
9. Put the Back Cover back on the Revive and ensure it is
securely in place.
10. Follow the instructions in Step 3 on page 26 to clean the
Humidifier Filter.
Step 1
Step 3
AIR FILTER MAINTENANCE (cont.)