10
Using the FreshSpa
PRODUCT OPERATION
FreshSpa Dual Temperature Only:
To adjust water temperature (when both hot and cold
water are connected), turn temperature dial slowly
towards “WARM” until the desired temperature is reached.
NOTES:
There may be a delay in the warm water reaching
the bidet attachment as the cold water in your
pipes clears and is replaced with hot water (similar
to the delay when you turn your faucet on).
If only connected to cold water, make sure that the
temperature dial on the bidet attachment is turned
as far as it can go towards the “COOL” setting for
best pressure adjustability.
TIP:
For a quick and easy way to get warm water to
the bidet, run the “Nozzle Cleaning” function with
the warm water turned on for a short time until the
water heats up, then use as normal.
WARNING:
Risk of scalding. High water temperature can cause severe burns.
Be sure to set the water temperature for your hot water heater at
or below 120°F (49°C) and use extreme caution when mixing hot
and cold water during use. Brondell is not liable for any misuse
of product or failure to use caution when connecting to hot water.
