17
16
Transceiver technical data
Studio address setting range
1 – 99
Lamp address setting range
1 – 40
Radio frequency channels (automatically regulated)
40
Frequency
2.4 GHz
Transmission time (transmitter to receiver)
0.425 ms
Central shutter speed
up to 1/1500 s
Focal-plane shutter speed
up to 1/320 s
Flash triggering possible via:
> Integrated hot shoe on central contact
> Lateral 3.5 mm sync jack in or out
Range outdoors
up to 50 m
Range indoors
up to 30 m
Range
up to 200 m
Integrated antenna
Dimensions (L x W x H)
68 x 38.5 x 33 mm /
2.7 x 1.5 x 1 inch
Weight
46 g / 35 oz
(including battery)
In the event of problems and undefined communication malfunctions bet-
ween RFS 2.1 devices, the cause may be strong frequency interference.
In such cases, make sure the devices are not within the range of baby
phones, video bridges, microwave ovens, cordless dect telephones, Wlan
routers or Bluetooth devices, or use a different studio channel.
Subject to change in the interest of technical progress.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Releases per second
100
Button cell battery in transceiver
Li-Mn CR2450
(560 mAh, 3 V)
Automatic switchover to energy-saving mode after
8 hours
Typical battery life
approx. 8 – 12 months
or 100,000 flashes
Sync voltage
3 V
