background image

1300 276 642

bromicrefrigeration.com.au

4

•  Read all instructions before installing or using this appliance.

•  Retain this manual for future reference.

•  Use this appliance only as described in this manual. Any other use not recommended by the manufacturer 

may cause fire, electric shock or injury. 

•  Improper installation, adjustment or alteration and failure to follow the warnings and instructions in this 

manual could result in severe personal injury, death or property damage.

•  The manufacturer is not responsible for any damage that could happen from improper use. The manufacturer 

emphasises that this appliance should be used in a responsible manner and that all procedures, warnings, 
and safety instructions contained in this booklet be followed strictly. 

•  Check the appliance for damage. Do not operate a damaged unit.

•  Check for damage to the appliance regularly. If damage to the appliance is suspected, discontinue use 

immediately and contact the supplier or qualified person to repair.

•  This appliance is not intended for use by people (including children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible of their safety.

•  Keep packaging material out reach of children.

•  Children should be carefully supervised to ensure that they do not play with the appliance.

•  Do not attempt to alter the appliance in any manner.

•  Please pay attention to the maximum load limit when filling the shelves.

•  All work on electrical equipment must be carried out by a qualified and licenced technician only.

•  Do not perform maintenance until the appliance has been turned off and power disconnected.

•  Never detach any cover except where specifically instructed in this manual. Doing so might expose live 

electrical parts.

•  Do not operate the appliance with panels, covers or guards removed.

•  Keep the air intake and outlets free of obstructions.

•  Do not use the appliance outdoors.

•  If the supply cord becomes damaged, it must be replaced by an authorised service agent or similarly 

qualified person in order to avoid a hazard.

•  If the appliance has not been used, or will not be used for a long period of time, disconnect  

power supply.

•  The appliance must be installed in accordance to AS1677.2:1998 to ensure there are no sources of ignition in 

any area where refrigerant could gather in the event of a leak. 

•  Electrical equipment should not be placed under the unit or where refrigerant could gather in the event of a 

leak. 

•  Installation/servicing of the appliance must be performed by a licenced technician with Gas Work 

Authorization if the appliance gas system is being opened or charged.

2. IMPORTANT NOTES AND WARNINGS

Содержание QUALITY MATTERS 3735204-NR

















Отзывы: