background image

NOTES:
- Supply connection must be protected with appropriate safety device, that includes 
isolation switch.
- Suitable junction box for connection to be supplied by installer.
- Control must be located in an environment of no more than 86°F ambient, away from 
other heat sources and separation clearances maintained.
- Wiring must be completed according to local electrical code.
- 24V DC lighting circuit is to be separated inside the junction box from 220-240VAC 
circuits.
- Electrical installation must ensure earth continuity is checked.

FOR INSTALLATION NOT USING  

BROMIC ECLIPSE PENDANT CONTROL  

 

ONLY TO BE INSTALLED & SERVICED BY LICENSED & AUTHORIZED TECHNICIAN. 

 

APPLIANCE MANUAL MUST BE READ BEFORE INSTALLING OR SERVICING THIS PRODUCT.

To control elements independantly 
L1 (66% element) & L2 (33% element) 
need independant 220-240V power 
supplies.

Power supply 220-240V - a.c.
Minimum Circuit Ampacity 17A.
(Provided by installer)

Power supply to suit 
rated input of transformer
(Provided by installer)

LED Transformer
Output: 24V DC,  

 

Power Rating: 25W Minimum 
(Provided by installer)

Junction box & terminals 
(Provided by installer)

Transformer wires 

 

(Provided by installer)

Power cable from heater 
(Supplied with heater)

WHITE 24V DC

-24V DC

GREEN/
YELLOW

GROUND

LIVE 240V

GREY 240V

NEUTRAL

BLUE

LIVE 240V

BLACK 240V

BROWN 24V DC

+24V DC

+24V DC

G

-24V DC

L2

N

L1

TRANSFORMER

OUTPUT 24V DC,  25W MIN

DC OUT 24V

AC IN

27

bromic.com/heat

PENDANT HEATER CONTROL WIRING DIAGRAM 

Содержание BH0920001

































Отзывы: