PLUMBING & GAS
27/02/2020 - V1.1
1
1. GENERAL DESCRIPTION
The Bromic Gas Regulators have been designed and manufactured to meet all relevant
Australian Standards, particularly AS 4267 – Pressure regulators for use with industrial
compressed gas cylinders. The Bromic regulators have been designed to connect to gas
cylinders and regulate the pressure and/or flow to the required work pressure. Bromic
regulators come with below items fitted:
Always follow the below recommendations to ensure safe operation:
1. Inlet Connection
2. Outlet Connection
3. Pressure or Adjusting Knob
4. Relief Valve (if fitted)
5. High Pressure Gauge
6. Low Pressure Gauge (if fitted)
2.
SAFETY MEASURES
WARNING: Never use a regulator for gases and pressures other than
those intended and marked by the manufacturer. Incorrect use may
lead to serious injury or death
WARNING: Some gases coming in contact with oil or grease can
cause it to explode violently. Do NOT use oil or grease or oily/greasy
hands, gloves, rags etc. on the regulators.
Bromic Part No. 1812020, 1812023, 1812026 and 1812028
Regulator Instructions
•
Regulators are NOT for use by children or persons who are incapacitated
•
Always keep children away from work area
•
Consult a medical professional regarding use of equipment under the influence of
prescribed medication
•
Do not use while under the influence of alcohol or illicit substances or unprescribed
medication
•
Always consult local regulation (e.g. work health and safety) regarding safe
use of compressed gasses
