Broilermaster PSCB-1 Скачать руководство пользователя страница 3

B101784-4-0712

Page 3

Grill Location

Broilmaster

®

 Gas Grills are  designed for outdoor use 

ONLY.

These mounting accessories are designed for use with 

Broilmaster

® 

 gas grills and must not be used with any 

other grill or for any other purpose.

Never install or operate your grill in any building, ga-

rage, or other enclosed area. To do so may result in the 

possibility of fire, property damage, or personal injury.

For your safety,  the grill should not be installed or 

operated under any combustible materials, such as 

carports, covered porches, awnings, or overhangs. To 

do so may result in the possibility of fire, property dam

-

age, or personal injury.

Never install or use  your grill in or on any recreational 

vehicle or boat. To do so may result in the possibility of 

fire, property damage, or personal injury.

CAution:  t

hE

 

inStAllAtion

 

And

 

opErAtion

 

of

 

thiS

grill

 

At

 

ClEArAnCES

 

lESS

 

thAn

 

SpECifiEd

 

bElow

 

mAy

 

lEAd

to

 

thE

 

poSSibility

 

of

 

firE

propErty

 

dAmAgE

or

 

pErSonAl

injury

A minimum clearance of eighteen (18”) inches is re-

quired from the back and sixteen (16”) inches from the 

sides of the grill to any combustible material. 

Examples of combustible materials are patio furniture, 

fences, or the wall of your home. 

The area surrounding the grill should be clear to ensure 

proper ventilation.  Do not obstruct the flow of com

-

bustion and ventilation air in any way.  The ventilation 

openings on the propane cylinder enclosure must also 

remain free and clear of debris.  

wArning:  d

o

 

not

 

inStAll

 

or

 

opErAtE

 

A

 

gAS

 

grill

whErE

 

gASolinE

 

or

 

othEr

 

flAmmAblE

 

mAtEriAlS

 

ArE

 

uSEd

or

 

StorEd

.  f

AilurE

 

to

 

Comply

 

with

 

thiS

 

wArning

 

Could

rESult

 

in

 

ExploSion

 

or

 

firE

 

CAuSing

 

propErty

 

dAmAgE

 

or

pErSonAl

 

injury

.

i

MpOrTanT

 

inFOrMaTiOn

g

as Types

Never use liquid propane gas with a grill designed for 

natural gas, or natural gas with a grill designed for liquid 

propane gas.  The type of gas required for your grill is 

defined on its product identification label.  Questions 

regarding different types of gases should be directed 

to your gas supplier.

Cleaning

Stainless steel surfaces may be cleaned with a spray-

on stainless steel cleaner available at most hardware 

stores.

Important:  Do not use harsh or abrasive cleaners!  Your 

cart has a highly polished surface and may be easily 

scratched.

Periodic Inspection and
Maintenance

Periodic inspections and maintenance are essential.  All 

Broilmaster

®

 Gas Grill products or mechanical devices 

eventually begin to wear due to environment, contami-

nants, corrosion or aging.  Inspect all components at 

least twice per year and replace any that show wear.

If any parts are damaged or missing, you may order parts 

from your local Broilmaster

®

 dealer.  Please refer to the 

Parts Diagram and Parts List section of this manual for 

more detailed information. 

Содержание PSCB-1













Отзывы: