GSF2818AN
Owner’s Manual
- 8 -
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if
necessary.
Estimated assembly time: 45 minutes.
Step 1
(a) Inset the casters (U) into the four holes on
the two sides of the cart base (S).
Step 2
a) Loosen the four pre
‐
installed bolts on the cart base (S) and
allow 1/4 bolt’s length to extend from the bottom panel.
b)
Align the two holes on the bottom of the left side cart panel
(O) with the two bolts extended from the cart base and push
down the left side panel until it locks into place. Tighten
bolts by hands until secure.
c)
Repeat the above procedure to assemble the right side panel
(Q).
d)
Loosen the four pre
‐
installed bolts on the left side panel and
right side panel. Align the pre
‐
drilled holes of the back panel
(P) with the extended bolts on the two side panels, slide the
bolts into each hole and tighten by hands until secure.
e)
Go back and tighten all bolts by the screwdriver provided.
Step 3
a)
Loose the four pre
‐
installed bolts at the top of the
two side panels. Align the extended bolts with the
holes of the side panel support (W), then lock the
bolts into the each hole and tighten by hands until
secure.
b)
Align the holes on two sides of the door beam (V)
with the holes on the two side panels. Insert one bolt
(AAA), one spring washer (BBB) and one flat washer
(CCC) into each hole, tighten by hands until secure.
c)
Loosen the two pre
‐
installed bolts on the door beam
(V) and slide the extended bolts into the holes on the
side panel support (W), tighten by hand until secure.
d)
Go back and tighten all bolts by the screwdriver
provided.
Pre-installed Bolt (4)
Pre-installed Bolt (4)
V
Pre-installed Bolt (4)
Pre-installed Bolt (2)
