GSF2818AN
Owner’s Manual
- 12 -
Step 15
a)
Rotate the igniter cap anticlockwise until it is open.
b)
Put one battery (HHH) into the battery box, and make
sure the positive pole is towards outside as the illustration.
c)
Close the igniter cap by rotating it clockwise until it is tight.
Fully Assembled View
Operating the Grill
CAUTION:
The use of unauthorized parts can create an unsafe condition and environment.
Your natural gas grill has been designed to operate on natural gas only, at a pressure of seven inches water column (7” W.C.).
Check with your gas utility for local gas pressure, because in some areas natural gas pressure varies. Also, check with your gas
company or with local building codes for instructions to install gas supply line or call a licensed and qualified installer. It is
recommended that an ON/OFF manual shut–off valve be installed at the gas supply source:
Outdoors after the gas line exits
outside wall and before quick disconnect or before gas supply line enters ground. Pipe sealing compound or pipe thread tape of the
type resistant to the action of natural gas must be used on all male pipe threads. Apply compound or tape to at least the first three
to four threads when making connections.
Never store or use gasoline or other volatile substance in the vicinity of this grill.
Right Side
Left Side
