Broil King DPA150-1, Руководство пользователя

Страница: 19 / 32

B102243-2-0615 Page 19
Pressure Regulator and Hose
Assembly
The pressure regulator has an outlet pressure of not more
than eleven inches water column. It must be connected to the
propane gas cylinder’s female valve outlet before the Grill and
Side Burner can be operated.
WARNING
O
perating a Propane gas grill without the pressure regu-
lator and hose assembly will cause gas leaks which could
lead to fire or explosion, resulting in property damage or
personal injury.
The pressure regulator’s fitting must remain clean and free of
nicks and scratches. A dirty, nicked or scratched fitting can cause
a gas leak, resulting in an explosion or fire. Use only genuine
Broilmaster replacement parts unless otherwise specified by
the manufacturer.
Installing "Tee" Connector
If your grill is equipped with a factory installed gas "tee" behind
the grill’s control panel, please skip to the next section.
Turn OFF the gas valve at the propane cylinder.
Disconnect the regulator and hose assembly from the cylinder.
Disconnect hose from the gas valve located under the grill’s
control panel.
Attach one end of the ten inch stainless steel flex line to the end
of the grill’s gas valve. Attach the other end of the stainless steel
flex line to the brass "tee".
Note: Grills manufactured prior to 1999 may require the
alternate "tee" connector .
Connecting to Propane Gas
Attach one end of the 34 inch stainless steel flex line to the end
of the Side Burner valve. Attach the remaining end of the hose
to the "tee" and use two wrenches to tighten the stainless steel
flex line connections. One wrench should be used to turn the
stainless steel flex line connector while the "tee" or valve is held
with the second wrench.
For older Broilmaster grills, this alternate tee fitting kit must be
ordered.
B100156 ALTERNATE TEE FITTING KIT
Index No. Description Part No.
1 Flared Tube Connector B100100
2 Alternate Tee Fitting B070519
PROPANE GAS CONNECTION