1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the attaching part on the back.
2. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.
Place the holder over the attaching part. Screw the holder onto the attaching part.
3. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part
forwards so it snaps into place in the holder.
To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the
upper part of the device out from the holder and then lift the device up and out from the holder.
4. The holder is in place.
