Brodie BiRotor Plus B27X, Руководство по установке и эксплуатации

Страница: 4 / 37

Page 4/37 IOM BiRotor Plus R19
2 Essential Instructions
General
Brodie International designs, manufactures and
tests its products to meet many international
standards. As the instruments are sophisticated
technical products they must be installed, used
and maintained properly to ensure they continue
to operate within their normal specifi cations. The
following instructions must be adhered to and
incorporated into onsite safety programs where
possible.
Read all instructions prior to installing, operating,
and servicing the product. If this instruction manu-
al is not the correct manual, tel1 912 489
0200 and the requested manual will be provided.
Save this instruction manual for future reference.
If you do not understand any of the instructions,
contact your Brodie representative for clarifi ca-
tion.
Follow all warnings, cautions, and instructions
marked on and supplied with the product. Inform
and educate your personnel in the proper installa-
tion, operation, and maintenance of the product.
Install your equipment as specifi ed in the instal-
lation instructions of the appropriate instruction
manual and per applicable local and national
codes. Connect all products to the proper electrical
and pressure sources.
To ensure proper performance, use qualifi ed
personnel to install, operate, update, program, and
maintain the product. When replacement parts
are required, ensure that qualifi ed personnel use
replacement parts specifi ed by the manufacturer.
Unauthorized parts and procedures can affect the
product’s performance and place the safe oper-
ation of your process at risk. Look-alike substi-
tutions may result in fi re, electrical hazards, or
improper operation.
Ensure that all equipment doors are closed and
protective covers are in place, except when main-
tenance is being performed by qualifi ed personnel,
to prevent electrical shock and personal injury.
When installing this equipment, bolting must con-
form to the requirements of ASME B16.5 paragraph
5.3 and to the material requirements of ASME
B16.5 Table 1B. Gaskets must conform to the re-
quirements of ASME B16.20.
It is the customer’s responsibility to ensure that
piping or other attachments connected to the
valve do not place adverse stresses on the valve.
The design of the valve has not been assessed for
the effects of traffi c, wind, or earthquake loading.
It is the customer’s responsibility to provide fi re
prevention measures and equipment per local
regulations.
The valve has been designed without allowance
for corrosion. The customer should implement a
periodic inspection and maintenance program to
ensure that no part of the valve’s pressure retain-
ing components has been subjected to corrosion.
Use of this equipment for any purpose other than
its intended purpose may result in property dam-
age and/or serious personal injury or death.