Brodie BERT-E, Инструкция по установке и эксплуатации

Страница: 79 / 94

Grand Total Reading (
GrTOTAL
)
The grand total is a separate total that is not reset when the total is reset. This allows the complete total
to be tracked by the grand total, while individual batch, or daily totals are reset regularly.
To display the grand total, press the
Up/Display
button. The display will read
GRTOTAL
, and the
GT
symbol will appear indicating the grand total is being displayed on the bottom display. After 10 seconds,
the bottom display will return to showing total. To lock the grand total on the display, press
Enter
.
Pressing
Menu
at any time will return to normal run mode.
Note: If the Display menu has been setup to display the grand total on the bottom display, pressing the
Up/Display
button will display the maximum and minimum readings followed by the total.
Max/Min Readings (
MAXIMUM
,
MINIMUM
)
The maximum and minimum (peak & valley) readings reached by the rate are stored in the meter since
the last reset or power-up. The meter shows
MAXIMUM
or
MINIMUM
to differentiate between run mode
and max/min display.
To display the maximum and minimum readings use
Up/Display
button to cycle the bottom display.
Maximum and minimum are displayed after the grand total.
Press the
Enter
button to remain in Max/Min display mode. If
Enter
is not pressed, the Max/Min display
readings will time out after ten seconds. The meter will return to display the actual reading. Pressing
Menu
at any time will return to normal run mode.
Resetting the Total (
RESET TOTAL?
)
If manual
Total Reset
is enabled in the
Program
menu, the total may be reset by pressing the
Reset
button and using the
Enter
button to confirm the reset.
Additionally if programmed for manual reset, the total may be reset using a normally open pushbutton
connected across the terminals RST and COM.
Note: The total is cleared immediately when Enter button is pressed. Totalization will then continue, even
if the Enter button or external reset button continues to be held down/triggered.
Resetting the Grand Total (
RESET GrTOT?
)
If manual
Grand Total Reset
is enabled in the
Program
menu, the grand total may be reset using the
Reset
button.
To reset the grand total, display the grand total by pressing the
Up/Display
button. While grand total is
being displayed, press the
Reset
button. Confirm the reset with the
Enter
button.
77