Broderson IC-200-2J, Руководство по эксплуатации и обслуживанию, Страница: 17 / 79

1-13
Optional Electrical Accessories:
Strobe Lights:
Two yellow strobe lights, one on each side of turret weight box, for high visibility
all around crane. Flashes 60-120 times per minute. Each strobe draws only one-
half amp. Includes operator controlled switch. Net Weight: 5 pounds (2 kg)
Rear Work Lights:
Two halogen flood lights mounted between the grille bars in the rear bumper.
Includes switch at operator station. Net Weight: 10 pounds (5 kg)
Boom Work Lights:
Two halogen work lights, one on left side of boom to light boom tip, and one on
right side of the turret to light ground under boom tip. Includes switch at
operator's station. Net Weight: 10 pounds (5 kg)
Hydraulic System:
Standard:
Tandem pump, direct-driven by engine, delivers 29 GPM (110 L/min) at 2600 PSI
(179 bar) and 34 GPM (129 L/min) at 2500 PSI (172 bar) at 2500 RPM governed
engine speed. System protected by relief valves, suction line strainer and 10-
micron return line filter. 54-gallon (204 L) reservoir equipped with breather and
locking filler cap. (Maximum pressure on IC-200-3G is 3000 PSI on the 29 GPM
(204 L) section of the pump.)
Boom Assembly:
Standard:
Three or four-section, high strength steel construction, equipped with bearing
pads for efficient support and extension. Double-acting hydraulic cylinder
telescopes booms. The telescope cylinder and the double-acting boom elevation
cylinder are equipped with direct-connected holding valves. The four sections on
the 3H telescope proportionally. Boom angle indicator is on side of boom.
Boom Swing:
Standard:
Heavy-duty bearing swing gear with external teeth supports boom. Rotation is
powered by hydraulic motor and worm gear drive. Swing gearbox may be
adjusted as wear occurs to minimize backlash. Boom is attached by high
strength steel weldment.
Main Hoist:
Standard:
Turret-mounted planetary gear hoist is hydraulically powered to provide a bare-
drum line pull of 10,000 pounds (4536 kg) at a speed of 100-feet-per-minute (30
m/min). Hoist drum is 9
7/8
-inch (251 mm) diameter by 16½ inches (419 mm)
long.
Main Hoist Rope:
Main hoist rope is 1/2” (13 mm) diameter, Warrington-Seale construction, 6x25
classification, EIP grade, IWRC core, RRL lay, minimum breaking strength 26250
lbs (117 kN), 231 feet (70 m) of wire rope for -2 boom and 282 feet (86 m) of wire
rope for -3 boom. Weight per foot is 0.5 lbs (0.7 kg per m). Note that rope weight
is not included in load calculations. 125-pound (57 kg) downhaul weight and
swivel hook are included.