manualshive.com logo in svg

Brocade Communications Systems SILKWORM 4016, Справочник по аппаратуре

Поделиться
Скачать
Brocade Communications Systems SILKWORM 4016 Скачать руководство пользователя страница 36

4-2

SilkWorm 4016 Hardware Reference Manual

Publication Number: 53-1000175-01

Accessing the SilkWorm 4016

4

Port Negotiation

The SilkWorm 4016 has been designed to be highly interoperable. It supports 1 Gbit/sec, 2 Gbit/sec, 
and 4 Gbit/sec transmit and receive rates with autonegotiation. The actual data signaling rate used on a 
port is automatically sensed and set to the rate supported by device or devices attached to the port. 

If the SilkWorm 4016 is connected to a device but is unable to negotiate the signaling rate, the operator 
can manually set the speed of each port through the management interfaces.

The SilkWorm 4016 is compliant with current Fibre Channel standards, including most current-
generation switch N_Ports, NL_Ports, and E_Ports as well as host adapters, Redundant Array of 
Independent Disks (RAID) storage devices, hubs, Fibre-SCSI bridge devices, and older Brocade 
SilkWorm switch families.

Operating System Support

Brocade Fabric OS has no specific host OS dependencies. The Fabric OS in the switches allows for any 
Fibre Channel-compliant device to attach to the switches as long as it conforms to the standards for 
device login, name service, and related Fibre Channel features. The operating systems listed in 

Table 4-

2

 are for the host machine running Brocade management applications outside the Fabric OS, such as 

Fabric Manager. 

Accessing the SilkWorm 4016

The SilkWorm 4016 is managed as a single element. It has a single IP address and appears as a separate 
entity to the telnet protocol and the Simple Network Management Protocol (SNMP).

When SNMP devices send SNMP messages to a management console running SAN management 
software, the information is stored in a Management Information Base (MIB). The SilkWorm 4016 
Fabric OS 4.4.1 supports the FibreAlliance Fibre Channel Management (FCMGMT) MIBs, allowing 
the provision of needed information to a SAN administrator.

In addition, the Brocade Fabric Access Layer (API) and the Storage Management Initiative (SMI) 
provide facilities for the discovery and management of physical and logical elements in a SAN. Using 
the Fabric Access interface to the Fabric OS, a client application can retrieve information and modify 
the configuration of Brocade switches in the fabric.

Table 4-2

Supported Operating Systems

Operating System

Version

AIX

4.3.3

Windows NT

4.0

Windows 2000

Initial Release

Solaris

2.5, 2.5.1, 2.6, 2.7, 2.8

HP UX

10.0, 11.0

Linux

Red Hat versions 6.2 and 7.0

Содержание SILKWORM 4016























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды