Brocade Communications Systems SILKWORM 4016, Справочник по аппаратуре

Страница: 18 / 54

1-4 SilkWorm 4016 Hardware Reference Manual
Publication Number: 53-1000175-01
Switch Characteristics
1
Port Side
Externally accessible ports and LEDs are on the port side of the switch. The port side faces out when the
switch is inserted into a .
Figure 1-1 details the switch’s port side. For a complete description of the
locations and interpretations of these LEDs, see “Interpreting LED Activity” on page 4-4 .
The insertion arm is located just above the port side of the SilkWorm 4016 and ends with a plastic
handle, accessible at the front of the port side of the switch. This arm is used to remove and insert the
unit as described in
“Inserting a SilkWorm 4016 into the Chassis” on page 2-2 .
Figure 1-1 Port Side of the SilkWorm 4016
1 Ethernet port
2 Power and status LEDs
3 Top of SilkWorm 4016
4 Insertion arm latch
5 Autosensing ports
The nonport (switch status) LEDs, shown as item 2 of Figure 1-1 , display switch-level information as
shown in Figure 1-2 .
Figure 1-2 Nonport LEDs
1 Module controller status
2 Switch status
3 Power and module status
10 11 12 13 14 15
!
3
5
1
2
4
10
!
1
2
3