Brocade Communications Systems SilkWorm 2400, Справочник по аппаратуре, Страница: 39 / 42

SilkWorm 2400 Hardware Reference Manual C-1
C
E
RROR
M
ESSAGES
C:
This appendix explains the error message format and possible errors.
There is one error message format for the switch whether you are gathering information
from the local RS-232 serial port or using a remote Telnet session.
In all cases, the last error encountered is the first error displayed. Up to 64 messages are
held in a buffer. If the 64 message limit is exceeded, the messages are overwritten in a
first in, first out sequence.
The
errShow
command displays all detected errors. The output provides additional
information over the front panel display. The following information is displayed in
Figure E-1:
■
There are two errors which have been detected.
■
The task ID and task name that incurred the error (task name are displayed using the
i
command).
■
The error type, date and time, the error level, and description.
■
If there is more than one occurrence of an error type, the number of occurrences is
shown in brackets following the date and timestamp.
NOTE:
The error counter goes to a maximum of 999.