FIPS Security Seal Procedures for Brocade FCX Series and Brocade FastIron SX Series
5 of 13
Publication Number: 53-1002119-01
•
Rear: Affix 4 total seals to the rear panel of the device. Affix one seal from the rear panel to the bottom panel
and three seals from the rear panel to the top panel. You must bend these seals to place them correctly. See
Figure 2
on page 6 for correct seal orientation and positioning.
FIGURE 1
Front, top, and right side views of a Brocade FCX 624S device with security seals.
NOTE
The orientation and placement of seals on the left side of the device mirrors the orientation and placement of seals
on the right side of the device. Seal placement on the right side of the device is visible in
Figure 1
above and
Figure 2
on page 6.
9
10
1
2
3
8
5
4
6
1 to 10 = FIPS security seals
7
