4 of 20
Brocade DCX-4S QuickStart Guide
Publication Number: 53-1001192-03
ATTENTION
In order to comply with EMI certification, the door of the DCX-4S must be installed and EMI plugs must be inserted in
the ICL cable sockets of the core switch blades if ICL cables are not used.
Safety notices
NOTE
Translated safety notices are in the
Brocade Product Safety Notices
publication, which is on the CD-ROM that
accompanies this product.
When using this product, observe the danger, caution, and attention notices in this manual. The notices are
accompanied by symbols that represent the severity of the safety condition.
The danger and caution notices are listed in numerical order based on their IDs, which are displayed in parentheses,
for example (D004), at the end of each notice. Use this ID to locate the translations of these danger and caution
notices in the
Brocade Product Safety Notices
.
Danger notices
A danger notice calls attention to a situation that is potentially lethal or extremely hazardous to people. A
lightning bolt symbol accompanies a danger notice to represent a dangerous electrical condition. Read and
comply with the following danger notice before installing or servicing this device.
DANGER
Use the supplied power cords. Ensure the facility power receptacle is the correct type, supplies the
required voltage, and is properly grounded. (D004)
Caution notices
A caution notice calls attention to a situation that is potentially hazardous to people because of some existing
condition. Read and comply with the following caution notice before installing or servicing this device.
CAUTION
Use safe lifting practices when moving the product. (C015)
Brocade DCX-4S, port side
NOTE
Airflow in the Brocade DCX-4S is from the nonport side to the left side of the chassis (viewed from the port side) and
out the exhaust vent. If you use the Port Side Exhaust Kit the air vents on the port side of the chassis (see
.
displays a sample configuration of the port side of the Brocade DCX-4S.