manualshive.com logo in svg

Brocade Communications Systems Brocade BladeSystem 4/24, Руководство администратора, Страница: 41 / 62

Поделиться
Скачать
Brocade Communications Systems Brocade BladeSystem 4/24 Скачать руководство пользователя страница 41

Access Gateway Administrator’s Guide

31

53-1000605-01

Configuring additional F_Ports

4

Figure 9

 shows a host connected to an embedded switch’s external F_Port when Brocade Access 

Gateway is enabled. The newly configured F_Port was mapped to an N_Port.

FIGURE 9

Example of adding an external F_Port (F9) on an embedded switch

Unlocking N_Port mode

By default, on embedded switches, all external ports are locked in N_Port mode when Access 
Gateway is enabled. Access Gateway supports only two types of ports, N_Ports and F_Ports 
because it connects only FCP initiators to the fabric. It does not support other types of ports, such 
as ISL (interswitch link) ports. 

The port types on a fabric switch are not locked. Fabric OS Native mode switch dynamically assigns 
the port type based on the connected device. F_Ports and FL_Ports for hosts, HBAs, and storage 
devices; and E_Ports, EX_Ports, and VE_Ports for connections to other switches. 

Unlocking the N_Port configuration automatically changes the port to an F_Port. When you unlock 
an N_Port, the F_Ports are automatically unmapped.

To disable N_Port mode lock settings

1. Connect and log in to the switch.

2. Enter the portCfgNport command.

switch:admin> 

portcfgnport

Ports                 0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15

--------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--

Locked N_Port        .. .. .. .. .. .. .. .. .. .. ON ON ON ON ON ON

3. Enter the portCfgNport command with 

<portnumber>

 0 operand to unlock N_Port mode.

Содержание Brocade BladeSystem 4/24































































Отзывы:

Нет отзывов