Brocade Communications Systems Brocade BladeSystem 4/24 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 62

background image

2

Access Gateway Administrator’s Guide

53-1000605-01

Overview of Brocade Access Gateway

1

FIGURE 1

Access Gateway and fabric switch comparison

The differences between the fabric switch (Fabric OS native mode) and Brocade Access Gateway
are as follows:

•

The Fabric OS switch is a part of the fabric; it requires two to four times as many physical ports,
consumes fabric resources, and can connect to a Brocade-based fabric only.

•

Brocade Access Gateway is outside the fabric; it reduces the number of switches in the fabric
and the number of required physical ports. You can connect Brocade Access Gateway to either
a Brocade, Brocade EOS, or Cisco-based fabric.

Brocade features in Access Gateway mode

When using a Brocade switch in Access Gateway mode, most features are no longer applicable.
These features include Admin Domains, Advanced Performance Monitoring, direct connection to
SAN target devices, Fibre Channel Arbitrated Loop support, Fabric Manager, FICON, IP over FC, ISL
trunking, extended fabrics, management platform services, name services (SNS), port mirroring,
SMI-S, and zoning. These switch features are available in the default switch mode of operation.

Access Gateway does not support any Secure Fabric OS features. All the security enforcement is
done in the enterprise fabric. The DCC policy in the enterprise fabric should include the N_Port
WWN and the port WWNs of all the

HBAs connected to the

F_Ports on Access Gateway that are

mapped to that N_Port. In case of a DCC policy violation, the port in the enterprise fabric to which
the F_Ports are connected and the N_Port is mapped to it on Access Gateway are disabled.

«
...
10
11
12
13
14
...
»

Содержание Brocade BladeSystem 4/24































































Отзывы:

Нет отзывов

Похожие инструкции для Brocade BladeSystem 4/24

MOBILE SECURITY FOR WINDOWS MOBILE -

Бренд: F-SECURE Страницы: 4

MOBILE SECURITY FOR UIQ -

Бренд: F-SECURE Страницы: 3

MOBILE SECURITY 6 FOR WINDOWS MOBILE -

Бренд: F-SECURE Страницы: 5

MOBILE SECURITY 6 FOR S60 -

Бренд: F-SECURE Страницы: 5

CLIENT SECURITY 7.00

Бренд: F-SECURE Страницы: 315

ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00

Бренд: F-SECURE Страницы: 115

ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -

Бренд: F-SECURE Страницы: 349

ANTI-VIRUS - FOR MICROSOFT EXCHANGE

Бренд: F-SECURE Страницы: 224

Бренд: Generic Media Страницы: 17

Бренд: M-Audio Страницы: 5

Бренд: ICP Страницы: 16

Бренд: Agilent Technologies Страницы: 9

CERTIFICATE SYSTEM 8 - DEPLOYMENT

Бренд: Red Hat Страницы: 132

Бренд: ArcSoft Страницы: 6

Бренд: 10ZiG Technology Limited Страницы: 125

Бренд: ACT Страницы: 124

Бренд: National Instruments Страницы: 149

CAPTUREPERFECT 3.1

Бренд: Canon Страницы: 85

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды