Broan Rangemaster RM533004, Руководство пользователя

Страница: 12 / 40

- 12 -
OPERATION
Controls
The hood is operated using the slide controls
under the bottom of the hood.
The
light switch turns the lamps on and off.
The blower switch :makes it possible to
select the motor operating speed. Position 0:
motor off.
The
pilot lamp lights up whenever the blower
is on.
HEAT SENTRY™
Your hood is equipped with a HEAT SENTRY™ thermostat. This thermostat is a
device that will turn on or speed up the blower if it senses excessive heat above
the cooking surface.
1) If blower is OFF - it turns blower ON to HIGH speed.
2) If blower is ON at a lower speed setting - it turns blower up to HIGH speed.
When the temperature level drops to normal, the blower will return to its original
setting.
WARNING
The HEAT SENTRY thermostat can start the blower even if the hood is turned
OFF. When this occurs, it is impossible to turn the blower OFF with its switch.
If you must stop the blower, do it from the main electrical panel.
LIGHT
SWITCH
PILOT
LAMP
BLOWER
SWITCH
HALOGEN BULBS
This range hood requires two halogen bulbs
(Type G9, 120Volt, 25 Watt Max, G-9 Base).
ALWAYS SWITCH OFF THE ELECTRICITY
SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change bulbs:
1. Remove the lamp lens cover by inserting
a small flat-blade screwdriver into each of
the three slots and gently prying it free.
CAUTION: DO NOT REMOVE THE
OUTER TRIM RING (LAMP ASSEMBLY).
2. Remove the bulb by pulling sideward(DO
NOT ROTATE). CAUTION: BULB MAY BE
HOT!
3. Replace with Type G9, 120Volt, 25 Watt
Max, G-9 Base halogen bulb. Do not touch
replacement bulb with bare hands!