Page 4
VENTILATION FAN / LIGHT MODEL QTXE150FLT
99045436A
Order service parts by “Part No.” - not by “Key No.”
Replacement parts
can be ordered on our
website. Please visit
us at www.broan.com
SERVICE PARTS
5. Insert
mask and
finish
ceiling.
Tape mask
into housing.
Mask protects
unit during
construction.
Remove be-
fore installing
grille.
Install ceiling
material. Cut
out around housing.
4. Connect electrical wiring.
Run 120 VAC house wiring to installation lo-
cation. Use proper UL approved connector to
secure house wiring to wiring plate. Connect
wires as shown in wiring diagrams.
WIRNG PLATE & SCREW
FROM PARTS BAG
6. Attach grille to housing.
Plug light into receptacle. Squeeze grille
springs and insert them into tabs on each
side of housing.
8. Remove light lens.
Carefully insert a small flat-blade
screwdriver between grille and lens.
Pry lens out.
7. Push grille against
ceiling.
9. Install light
bulbs.
Product includes
(2) 18W (max.),
type GU24
fluorescent bulbs
with M.O.L.
(maximum overall
length) of 3.9”
(100mm).
Purchase a 4W
incandescent night light bulb.
Insert bulbs into their sockets. Replace lens.
3.9" (100mm) M.O.L.
Key No. Part No.
Description
1 97020009 Housing
2
97018331
Duct Connector
3
97018721
Parts Bags (includes wiring plate & all screws)
4
97018448
Wire Panel/Harness Assembly
5
97020012
Blower Assembly
6
99140208
Grille Spring (2 req’d)
7
97018531
Grille Assembly (includes key nos. 6 & 8)
8 99111399 Lens
9
99271381
Bulb, GU24, 18W Fluorescent (2 req’d)
10
97018014
Spacer (2 supplied)
11
97020013
Hanger Bar Kit
7
1
2
3
3
3
3
5
4
10
10
11
11
3
6
9
8
SCREW
