MAINTENANCE
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY BEFORE
CARRYING OUT ANY OPERATIONS ON THE APPLIANCE.
Grease Filter
The grease filter should be cleaned frequently. Use a warm detergent
solution. Grease filter is dishwasher safe.
To remove the grease filter: remove the (4) screws and take off the
metal grid. Take off the metal wires and remove the grease filter.
Non-Ducted Recirculation Filter
The Non-Ducted Recirculation filter should be changed every 6
months.
To remove the Non-Ducted Recirculation filter:
1. Remove the grid taking off the (4) “A” screws 3.9x6mm (Fig. 3).
2. Remove the metal wires (Fig. 4) and replace the Non-ducted
recirculation Filter.
Cleaning
Occasional care will help preserve its fine appearance.
• Clean with warm water and mild detergent only.
• Follow all cleaning by rinsing with clear water.
• Wipe dry with clean, soft cloth.
Light bulbs
This range hood requires two 40-Watt light bulbs (not included).
To change bulbs:
1. Remove the 2.9x9.5mm screw securing the light fitting.
2. Pull down lens to remove.
3. Replace with light bulbs of the same type (MAX 40W, 120V,
E12, Type B or Type T8 Bulb). CAUTION: BULB MAY BE HOT!
SERVICE PARTS
KEY NO.
PART NO.
DESCRIPTION
5
B03118152
Grid (White)
5
B03127681
Grid (Silver)
9
B08087922
Grease Filter
23
B03295095
Upper Lampholder
24
B03295094
Lower Lampholder
27
B02011270
Metal Wire
28
B02300280
Lampholder
29
B03294794
Light Fitting
230
BE3348475
Controls Closing
236
B02300822
Blower Switch (White)
236
B02300826
Blower Switch (Black)
237
B02300823
Light Switch (White)
237
B02300827
Light Switch (Black)
332
BE3248476
Cover Controls
415
B03202454
Strain Relief Bushing
CAS
R730090
Blower Assembly
-
B06108604
Socket Assembly
(Includes key No.24, 23, 28)
-
-
“40 Watt Max.Candelabra
Bulbs not included”
-
B08999040
Non-Ducted Filter Kit
(purchased separately)
GREASE
FILTER
METAL WIRES
FIG. 7
FIG. 8
