INST
ALLA
TION MANUAL
INST
ALLA
TION
11
5 ]
Remove the parts bag, taped on the inner back of hood, near the left corner. Remove the
EZ1 brackets from inside the hood by cutting off the tie wrap. Discard the tie wrap.
6 ]
Remove Electrical Power Cable Knockout from top (vertical exhaust) or back (horizontal
exhaust) of hood. For knockout removed from back of hood, install an appropriate strain
relief, 1/2” diameter (not included). For knockout removed from top of hood, the strain relief
will be installed later.
EZ1
BRACKETS
ELECTRICAL
POWER CABLE
KNOCKOUT
PARTS BAG
