6
4. REMOVE BAFFLE FILTERS, GREASE DRIP RAIL
AND ELECTRICAL COMPARTMENT COVER
A.
Remove tape on filters.
Remove filters from hood and set aside.
NOTE: It is recommended to start with the center one(s).
B.
Remove tape on grease drip rail (
1
). Lift out grease drip rail and set aside.
Remove electrical compartment cover (
2
).
5. REMOVE KNOCKOUT OPENING
Punch out the electrical knockout hole on the back of the
hood. Install the wire clamp (included in parts bag).
HR0073
HD1023
A
B
1
2
6. INSTALL
ADAPTER
Remove adapter from inside hood.
Using both no. 8 x 3/8” zinc-plated screws from parts bag,
assemble the adapter on the top of the hood.
Seal all joints with metal foil duct tape to eliminate air
leaks.
HJ0069
M
OUNTING
S
CRE
W
LOCATIONS
