11
19. REINSTALL FILTERS
CAUTION
Remove protective plastic film covering filters before installing them.
20. LED LIGHTING
!
WARNING
Do not touch lamps during or soon after operation. Burns may occur. Cannot be replaced by any other type of light
bulb or LED module.
The lighting of this hood is produced by two LED modules (included).
HO0139
HD0373
B
C
1. Using a Phillips no. 2 screwdriver, assemble the knob to each filter.
NOTE: The screw MUST BE on filter tabs side. See illustration at right.
2. Rest rear filters edge on filter springs (
B
) in the power pack.
3. Using knob, tilt up the filters into position. Make sure filter tabs (
C
) are securely engaged in
power pack front edge after installation.
21. USE AND CARE
Filters
The filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your cooking style generates
more grease — like frying foods or wok cooking.
Remove filter by pushing it towards the back of power pack and rotating filter downward. Filters are dishwasher safe. Allow filters to dry
completely before reinstalling them in the power pack.
Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filters may occur if using phosphate de-
tergent or as a result of local water conditions — but this will not affect filter performance. This discoloration is not covered by the warranty.
Blower(s) Cleaning
Remove the filters in order to access the blower(s). Use a shop vacuum to clean the blower(s).
Do not immerse in water.
