Single Rail LCD Console QIG
1
Notes:
1. Please check all peripherals according the list before installation. To make sure
that the whole unit was not damaged and lost during shipping process. If you
encounter any problem, please contact your dealer.
2. Before installation, make sure all peripherals and computer have been turned
off.
3. The cabinet depth range must be in 508 ~ 809 mm for 17
” LCD console (548 ~
849 mm for 19
” LCD console.). Contact your dealer for deeper cabinet
application.
4. Reliable grounding of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to
the branch circuit.
Hardware kits contents:
1. Rail with front and rear bracket x 2
2. Screw (length = 6 mm) x 6
Install steps:
1. Adjust rail until one screw appear. Loose (Not release) two rear screws then
adjust rear bracket to fit your cabinet.
Rail
