Broadcom NetXtreme, Руководство пользователя

Страница: 67 / 193

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 67
Broadcom Confidential and Proprietary
Description:
This value determines the size of the expansion ROM. This option does not apply to PXE
in system ROM. Options 8,9, 26 - 29 and 39-40 configure the boot protocol behavior.
64k(0) Advertises 64k expansion ROM size.
128k(1) Advertises 128k expansion ROM size.
256k(2) Advertises 256k expansion ROM size.
512k(3) Advertises 512k expansion ROM size.
1M(4) Advertises 1M expansion ROM size.
2M(5) Advertises 2M expansion ROM size.
4M(6) Advertises 4M expansion ROM size.
8M(7) Advertises 8M expansion ROM size.
16M(8) Advertises 16M expansion ROM size.
30
Design Type
Configure
Description:
Select NIC or LOM based Ethernet controller.
NIC(0) Option selected for a plug in network interface card.
LOM(1) Option selected for a LAN on motherboard.
Note:
The firmware and the drivers use this to determine the operational characteristics of a
device. For example, on a LOM GPIO2 is tied to the SEEPROM write protect pin and on a
NIC GPIO 1 and 2 is used to switch between main and auxiliary power for wake on LAN
functionality.
31
Read only VPD Vendor Specific Data (V0)
Reference
Description:
VPD V0 value. Data field provided for the customer.
32
Read/Write VPD Vendor Specific Data (V1)
Reference
Description:
VPD V1 value. Data field provided for the customer.
33
Reversed Nway Configure
Description:
Nway Negotiation.
0 (default) Auto-negotiation is done from 1000->100->10 Mbits/s.
1 Auto-negotiation is done from 10->100->1000 Mbits/s.
Note:
A user could set the chip for option 1 when running a laptop on battery power. The chip
would auto-negotiate starting at a lower speed and lower power. The chip would only go to
higher line rates and higher power if the lower line rates were unavailable.
34
Limit WoL Speed to 10
Configure
Description:
Limit Wake on LAN (WoL) line speed.
No(0) 10 or100 Mbits/s is used for WoL.
Yes(1) Only 10 Mbits/s is used for WoL.
35
Fiber WoL Capable
Configure
Description:
Fiber Wake on LAN (WoL) Capable enable.
No(0) Disable Fiber WoL.
Yes(1) Enable Fiber WoL.
36
Clock-Run Setting
Configure