Broadcast Showman 1000 Скачать руководство пользователя страница 27

Страница: 27 / 71

Multi-Standard Analogue TV Demodulator

Showman 1000

Operation



2008 dB Broadcast Ltd

Provisional Version 0.3

After the final channel has been set:

Press <ENTER> to store.

Press <ESCAPE> <ESCAPE> <ESCAPE> to return to DEFAULT.

Setting Standard:

From DEFAULT:

Press <ENTER> <ENTER>

▲ ▲ ▲ <ENTER>.

The LCD should display User Table Standard (Factory default: Standard I).

Press

▲ or ▼ to select the required Standard.

Press <ENTER> to accept or <ESCAPE> to reject the selection.

Press <ESCAPE> <ESCAPE> to return to DEFAULT.

After the Channels and Standard have been set, the User Defined Table must be selected-
See Selecting a Pre-Installed Channel Table above.

Channel Autosearch

Channel Auto-Search is a quick way to store the active analogue T.V. channels present at
the RF Input of Showman 1000 and present them as a series of Programs, available for
quick selection from DEFAULT.

The Auto-Search feature should only be used once the correct Channel Table has been
selected (See above).

From DEFAULT:

Press <ENTER> <ENTER>

▲ ▲ ▲ ▲ <ENTER>.

The LCD should display Auto Channel Search.

Press <ENTER> to start the search.

The LCD should display Searching… along with a count showing the progress of the search
through the current Channel Table.

The LCD will also display Found: XX where XX is a count showing the number of active
channels found and stored as a series of Program numbers.

At the end of the search:

Press

▲ ▲ ▲ to display Receiver Options/Load Program.

Press <ENTER> <ENTER> to load the program.

Press <ESCAPE> <ESCAPE> to return to DEFAULT.

The bottom line of the DEFAULT screen should now display a Program and Channel
number. To change Program simply press

▲ or ▼.

Содержание Showman 1000








































































Результаты поиска

Содержание Showman 1000

Отзывы:

Бренды по названию

Популярные бренды

Broadcast Showman 1000, Руководство пользователя

Результаты поиска

Содержание Showman 1000

Отзывы:

Бренды по названию

Популярные бренды