il
@b
d
l
i
360 854 9559
f
866 783 1742
WebSwitch Installation and Operation Manual
SETUP
2. Auto Refresh Page:
Web pages traditionally display static information. The WebSwitchTM control
page, however, displays information that is dynamic. Each time the control page is
loaded to the browser, it displays a snapshot of the current status of the unit. If the
state of the unit changes, the information on the control page will be outdated unless
the page is re-loaded. Whenever a user changes the state of the output via the web
browser, the web page will automatically reload the control page to display current
information. If, however, the output state changes due to the automatic reboot con-
troller or due to a command sent from another machine, the output state will not be
updated and the control page information will be obsolete. The ‘Auto Refresh Page’
option will cause the control page to continually update its contents by setting a
timer in the web page that causes it to be reloaded at a specified time interval.
3. Duration:
If the ‘Auto Refresh Page’ option is set to Yes, this field specifies the time in sec-
onds that the page will be refreshed. It can be set from 1 to 32 seconds.
4. Description:
This text is used to describe the function of Out 1 (or Out 2) on the control page.
This field can be up to 20 characters in length.
5. ON/OFF Buttons:
When this option is set to Yes, the control page will display buttons to turn the device
on and off. If this option is set to No, the control page will not display buttons to
turn the device on and off.
