e-mail:
voice:
360.854.9559
fax:
866.783.1742
3
SS 2.1 MLR/BNC Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of a BROADCAST TOOLS® SS 2.1 MLR/BNC trans-
parent two input, dual output switcher/router (referred to as the SS 2.1 MLR/BNC
throughout this manual). We’re confident that this product will give you many years
of dependable service. This manual is intended to give you all the information need-
ed to install and operate the BROADCAST TOOLS®
SAFETY INFORMATION
Only qualified technical personnel should install Broadcast Tools products. Any
attempt to install this device by a person who is not technically qualified could result
in a hazardous condition to the installer or other personnel or damage Broadcast
Tools product or other equipment. Please ensure that proper safety precautions have
been taken before installing this device. If you are unfamiliar with this type of
equipment, please contact a properly qualified engineer to handle the installation
and setup of the Broadcast Tools product.
Broadcast Tools, Inc., is unable to support NON-Broadcast Tools software, hard-
ware or NON-Broadcast Tools computer/hardware/software problems. If you experience
these problems, please research your hardware/software instruction manuals or contact the
manufacturers technical support department.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment.
If you would like more information about Broadcast Tools® products, you may
reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax:
866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail:
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
WEBSITE:
Visit our web site for
product updates and
additional information.
Broadcast Tools is a Veteran Owned Business
Designed, Assembled and Supported in WA State, USA