10
8-Port DC Power Manager User Manual (PS-8DC-5V/12V/24V/48V)
TELNET CONTROL
BUTTON CON-
FIGURATION
ON THE TOP MENU
BAR CLICK ON CUS-
TOMIZE AND THEN
CLICK ON 8/16
BUTTON KEYPAD.
Before attempting to use Telnet control, please ensure that both the unit and the PC/Laptop
are connected to the same active network.
To Access The Command Line Interface (CLI)
In Windows 7
Click
Start
, type “cmd” in the search filed and press
Enter.
In Windows XP Click
Start
, >
Run
type “cmd” in the search filed and press
Enter.
In Windows 7
Click Go >
Applications
>
Utilities
>
Terminal.
Upon accessing the Command Line Interface (CLI), type “telnet” followed by the IP address
of the unit (and the port number if it is non-standard) and hit the “Enter” key. See below for
reference.
This will establish communication to the desired unit to control. Type “help” to list the
available commands.
Note: The unit’s default IP address is 192.168.1.50. If the IP address is changed then the IP
address required for Telnet access will also change accordingly.