7
OPERATION CONTROL AND FUNCTIONS
LinkBridge 18G/4K 18G Enhanced HDMI Splitter User Manual (LB-H2-SP2E / LB-H2-SP4E)
POWER LED:
This LED will illuminate to indicate the unit is on and receiving
power.
6G LED:
When the input source bandwidth is above 340MHz, the 6G
LED
will
illuminate.
3G LED:
When the input source bandwidth is between 275MHz and
340MHz, the 3G LED will illuminate.
IN HDCP LED:
When HDCP is required by the input source, this LED will
illuminate. If no HDCP is detected, the LED will remain off.
OUT HDCP LEDs
: When a connected display supports HDCP and HDCP is
active, the LED for that output will illuminate. If HDCP is not
active, the LED will remain off.
IN SYNC LED:
When sync from a live source has been detected on the input,
this LED will illuminate. If no source is detected, the LED will
remain
off.
OUT SYNC LEDs:
When a live source is being sent to a connected display,
the associated LED will illuminate. If no display is connected
or no signal is being passed, the LED will remain off.
EDID:
This switch selects the EDID that is provided to the input.
4a) TV Mode:
The “TV Mode” setting copies the EDID from
the display connected to output 1 and passes it to
the
input.
Note:
If the connected outputs are a mixture of HDMI and DVI displays, the EDID’s
color space will be set to RGB for compatibility reasons.
4b) STD Mode:
The “Standard Mode” setting provides a pre-
defined
internal
EDID
(3840x2160@60Hz,
RGB,
LPCM
2.0)
to
the
input.
SYS-RST:
Controls the CEC “active source” reset functionality of the unit.
When switched to the “ON” position the unit will send a CEC
active source reset command to all connected displays
every 8~10 minutes. This command requests that any
connected CEC compliant TVs switch to the input the unit is
connected
on.
Note:
This function is ideal for TV displays where the public has access to the
controls and might switch the input away from the preferred source.
1
2
3
4
FRONT PANEL
5
