LBO-H/DP-EAD-T User Manual
Link Bridge
TM
Fiber Optic HDMI/DisplayPort Transmitter
Broadata Technical Support, [email protected]
13
5.0 MAINTENANCE AND TROUBLESHOOTING
5.1 Maintenance
There is no operator maintenance other then keeping the units
clean. However, observe the following light indicators to make
sure that the unit is working properly:
5.2 Troubleshooting
If the LBO-H/DP-EAD-T units do not operate properly after
installation, check for: possible cable breaks, loose
connections, and incorrect cable connections. If a problem
exists on the fiber link, please check your fiber connectors for
improperly cleaned fiber cables and connectors. If problems
persist that may be fiber related, contact BCI at 1-800-214-0222
for further assistance.
For electrical problems, perform the following troubleshooting
procedures:
1.
If the POWER indicator is OFF, check for the following:
a.
The line cord is plugged into the unit and your outlet
has power.
2.
If the POWER indicator is ON, but the Optical Link
indicator is OFF, check for the following:
a.
Make sure the appropriate (Multimode) fibers are being
used.
b.
Fiber and fiber connectors are not broken.
c.
For each unit, the transmit (TX) fiber is connected to
the other unit’s receiver (RX).
3.
If the POWER indicator and Optical Link indicator are
ON, but the audio/video channels are not operating,
then:
