LBC-H-R-DOP User Manual
Link Bridge
TM
HDBaseT HDMI Receiver w/Dual Video Output
Broadata Technical Support, (800) 214-0222
6
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Front Panel
1.
HDMI OUT 1 & 2:
Connect to HDMI displays for instant image
display or cascade with another family type transmitter. The
unit will detect HDMI OUT 1’s EDID when it obtain a 4Kx2K
EDID and send out the signal accordingly to other output ports.
If HDMI OUT 1’s EDID is without a 4Kx2K’s EDID the unit will
detect all output’s EDID and send out the signal that all output
can accept.
This device obtains the last memory function therefore, the
device will use the last HDMI OUT 1’s EDID when HDMI OUT
1 is not connected to a display after power cycling or switch
in between the EDID setting.
2.
LAN:
Connect to intranet or internet service system for a total
sharing rate of 100Mbps within the link of Receiver.
Warning: DO NOT connect this slot with any of the
CAT-5e/6/7 port, doing so may trigger a power shot down
and ruin the device.
3.
RS-232 OUT:
Connect to a RS-232 enabled device (with
supplied 3.5mm Phone Jack to D-Sub 9-Pin male adaptor) for
transmit of RS-232 commands.
HDMI OUT 1
HDMI OUT 2
LAN
RS-232 OUT
CAT5e/6/7 to HDMI with LAN/IR/RS-232
Receiver
1
2
3
1
