LB-KP8E User Manual
Link Bridge
TM
8-Button Wall Plate Ethernet Controller
Broadata Technical Support, [email protected]
9
2.4 Telnet Control
Before attempting to use the Telnet control, please ensure that
both the device under control and the PC/Laptop are connected
to the same active networks.
To access the Telnet control in Windows 7, click on the ‘Start’
menu and type “cmd” in the Search field then press enter.
Under Windows XP go to the ‘Start’ menu and click on “Run”,
type “cmd” with then press enter.
Once in the command line interface (CLI) type “telnet”, then the
IP address of the unit, then hit enter.
This will bring us into the unit which we wish to control. Type
“help” to list the available commands.
Note: Commands will not be executed unless followed by a carriage
return. Commands are case-sensitive. If the IP is changed then the IP
Address required for Telnet access will also change accordingly.
