LB-KP8E User Manual
Link Bridge
TM
8-Button Wall Plate Ethernet Controller
Broadata Technical Support, [email protected]
11
2.5.1 Macro Settings
The Background Light Bar allows user to instantly change the
LEDs lighting percentage based on the orignial illumination
setting.
There are 6 Macros pre-configured as default setting for testing
the Wall-Plate Control System’s functionality. Click on Macro
1~6 to demonstrate the function of lighting LEDs.
•
Macro 1: Light up the Red backlight LED with 100% brightness
sequentially from 1~8 with every 500ms.
•
Macro 2: Light up the Blue backlight LED with 100%
brightness sequentially from 1~8 with every 500ms.
•
Macro 3: Switch off all the read backlight LED with 0%
brightness.
•
Marco 4: Switch off all the blue backlight LED with 0%
brightness.
•
Marco 5: LED show mode toggle, swith off Demo Mode
•
Macro 6: Light up the Blue backlight LED with 10% brightness,
Switch off all the blue backlight LED with 0% brightness,
switch Off & On Relay 1 with delay of 1000ms.
To disable default testing mode, set Demo Mode switch to off.
