brixlelektronik
...we got the solution
–
bc-12er 12 channel receiver
bc-20 plus 20 channel receiver
higher. Transmitters with software versions below 1.500 can only access modules
with identifier 0!
Moduladresse
0..9
Define a unique identifier for this module
[Module identifier]
Upon delivery all modules will come with 0
Min.Spannung
3.5..9.99
The BEC voltage will be monitored and this will
[minimum voltage]
define the minimum voltage. A voltage below the
programmed value will trigger the alarm on the
transmitter (bc-12er)
Min.Spannung
5.00..15.0
The BEC voltage will be monitored and this will
[minimum voltage]
define the minimum voltage. A voltage below the
programmed value will trigger the alarm on the
transmitter (bc-20 plus)
BSZ EIN mit
A..z
The hour meter will be started with this input
[hour meter on]
device while signal is <-10% and > 10%.
`-` (below A) will reset the resetable hour meter
BEC/Wandler
Ein bei Verb.
With this option the internal BEC system on the
[BEC]
[on if connected] bc-20 plus will be switched off when the module is
in park mode (saves energy while in park)
Immer Ein
BEC will remain always on. (Servos will hold load)
[Always on]
Aus b.LoBat
BEC will be disabled if the programmed min
[Off if battery low] voltage is reached
A second BEC system will supply the main processor on the module even if the
BEC for the universal output is switched off.
Features
Funktion:Servo/Regler [Function:Servo/ESC]
Stick movement will be transmitted 1:1 from transmitter to receiver
Senderkanal
A-z
Defines the input device of the tranmitter (Stick, switch, etc)
[Input device]
Einschaltwert
Defines the position of the connected device when the module
[Default value power on] is powered up.
Gemerkt
Last position of the connected device before
[Memory]
switched off
kein Sig.
No servo signal send to the connected device
[no signal]
23.06.14 Vxx417
